Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® HT CZM 30 BLACK TLD - PA*-GF30 - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

PA11/10T,GF30,MHL,C16-090  

Rilsan® HT CZM 30 BLACK TLD is a polyphthalamide produced from a renewable source. This grade is glass fiber-reinforced, formulated and designed for injection molding for high-temperature applications.

According to ASTM D6866, the biobased carbon content is measured at 68%.

Main applications:

• Automotive & transportation quick connector for flexible fuels and powertrain applications
• High-temperature injection molding

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.

Caratteristiche Fisiche	secco/cond	Unitá	Norma del test
ISO Data
Indice di fusione di volume, MVR	15 / *	cm³/10min	ISO 1133
Temperatura	300 / *	°C	-
Carico	2.16 / *	kg	-
Ritiro di stampaggio, parallelo	0.3 / *	%	ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare	1.0 / *	%	ISO 294-4, 2577

Proprietà Meccaniche	secco/cond	Unitá	Norma del test
ISO Data
Modulo a trazione	8700 / -	MPa	ISO 527
Carico unitario a rottura	151 / -	MPa	ISO 527
Deformazione a rottura	2.6 / -	%	ISO 527
Resistenza all'urto Charpy, +23°C	57 / -	kJ/m²	ISO 179/1eU
Resistenza all'urto Charpy, -30°C	54 / -	kJ/m²	ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C	9.1 / -	kJ/m²	ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C	7.4 / -	kJ/m²	ISO 179/1eA

Proprietà Termiche	secco/cond	Unitá	Norma del test
ISO Data
Temperatura di fusione, 10°C/min	255 / *	°C	ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa	220 / *	°C	ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa	240 / *	°C	ISO 75-1/-2

Altre Proprietà	secco/cond	Unitá	Norma del test
Assorbimento d'acqua	1.13 / *	%	Sim. alla ISO 62
Assorbimento d'umidità	0.22 / *	%	Sim. alla ISO 62
Massa volumica	1300 / 1300	kg/m³	ISO 1183
Biobased content	67	%	-

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione

Forma fisica disponibile

Pellet, Nero

Additivi

Agente di distacco

Caratteristiche speciali

Stabilizzato o stabile alla luce, Estab. agli U.V. o per applicaz.in esterni, Stabilizzato o stabile al calore

Certifications

Contiene risorse rinnovabili

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa

Altre informazioni

Stampaggio ad Iniezione

Injection molding process conditions :
- Typical melt temperature (Min / Recommanded / Maxi) : 270°C  / 280°C / 320°C.
- Typical mold temperature : 90 - 110°C.
- Drying time and temperature (only for bags opened for more than two hours) : 4 - 8 hours / 100 - 110°C.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.