Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SCHULAMID® 66 GF 25 FR 5 A - PA66-GF25 - LyondellBasell Industries

Material Data Center offers the following functions for SCHULAMID® 66 GF 25 FR 5 A:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Schulamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto

25% glass fibre reinforced PA 66 with halogenous flame retardant agent; without PBDE and antimony trioxide; GWIT 850°C


Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 10300 / 8000 MPa ISO 527
Carico unitario a rottura 146 / 112 MPa ISO 527
Deformazione a rottura 2.2 / 3 % ISO 527
Resistenza all'urto Charpy, +23°C 52 / 55 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 52 / - kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 10 / 12 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C 10 / - kJ/m² ISO 179/1eA
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 240 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 250 / * °C ISO 75-1/-2
Reaz. al fuoco spess.nom. 1.5mm V-0 / * class IEC 60695-11-10
Spessore provato 1.5 / * mm -
Yellow Card disponibile sì / * - -
Reazione al fuoco a spessore h V-0 / * class IEC 60695-11-10
Spessore provato 0.5 / * mm -
Yellow Card disponibile sì / * - -
Reazione al fuoco 5V a spess. h 5VA / * class IEC 60695-11-20
Spessore provato 3.0 / * mm -
Yellow Card disponibile sì / * - -
Indice di ossigeno 34 / * % ISO 4589-1/-2
Proprietà Elettrichesecco/condUnitáNorma del test
ISO Data
Resistività volumica >1E13 / 1.8E11 Ohm*m IEC 62631-3-1
Resistività superficiale * / 4.7E14 Ohm IEC 62631-3-2
Res. Alle correnti striscianti superficiali 400 / - - IEC 60112
Altre Proprietàsecco/condUnitáNorma del test
Massa volumica 1590 / - kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 80 °C -
Pre-essiccamento - Tempo 4 - 6 h -
Temperatura di fusione 270 - 300 °C -
Temperatura dello stampo 60 - 90 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Granuli
Additivi
Agente di distacco
Caratteristiche speciali
Ritardante di fiamma
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Altre informazioni
Stampaggio ad Iniezione
PREPROCESSING; Pretreatment
Predrying: 4-6h / 80°C

PROCESSING ;Processing:

Melttemperature270 - 300°C
Mouldtemperature60 - 90°C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.