Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SPESIN® KP212V0 - PBT - Kolon Industries

Material Data Center offers the following functions for SPESIN® KP212V0:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Spesin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 1.9 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 1.9 % ISO 294-4, 2577
ASTM Data
Ritiro di stampaggio, parallelo 0.022 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Resistenza a trazione 55 MPa ISO 527
Modulo a flessione, 23°C 2410 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 3.2 kJ/m² ISO 179/1eA
Durezza Rockwell R 118 - ISO 2039-2
ASTM Data
Resistenza alla trazione 60 MPa ASTM D 638
Modulo a flessione 2628 MPa ASTM D 790
Resistenza alla flessione 98 MPa ASTM D 790
Durezza Rockwell R 118 - ASTM D 785
Resistenza all'urto Izod con intaglio, 1/8 in 35 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 223 °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 55 °C ISO 75-1/-2
Reazione al fuoco a spessore h V-0 class IEC 60695-11-10
Spessore provato 0.8 mm -
ASTM Data
UL 94 combustibilitá V-0 - UL 94
Spessore testati 0.8 mm -
coefficiente d’espansione termica, lung. 70 E-6/K ASTM D 696
DTUL a 66 psi 165 °C ASTM D 648
DTUL a 264 psi 55 °C ASTM D 648
Temperatura di fusione 224 °C ASTM D 3418
Proprietà ElettricheValoreUnitáNorma del test
ASTM Data
Rigidità elettrica, breve periodo di tempo 25 kV/mm ASTM D 149
Costante dielèttrica, 1 MHz 3.2 - ASTM D 150
Resistenza all’arco 85 s ASTM D 495
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1420 kg/m³ ISO 1183
Densità 1420 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 100 - 120 °C -
Pre-essiccamento - Tempo 3 - 5 h -
Umidità del Processo ≤0.05 % -
Temperatura dello stampo 60 - 80 °C -
Zona 1 240 °C -
Zona 2 245 °C -
Zona 3 250 °C -
Temperatura dell ugello 250 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche speciali
Ritardante di fiamma
Disponibilità geografica
Nord America, Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.