Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Starflam PZ0052E - PA6-GF - Eurostar Engineering Plastics

Material Data Center offers the following functions for Starflam PZ0052E:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Starflam datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 6100 MPa ISO 527
Carico unitario a rottura 82 MPa ISO 527
Deformazione a rottura 2.5 % ISO 527
Modulo a flessione, 23°C 5200 MPa ISO 178
Resistenza all'urto Izod, +23°C 25 kJ/m² ISO 180/1U
Resistenza all'urto Izod con intaglio, +23°C 3 kJ/m² ISO 180/1A
ASTM Data
Modulo a trazione 7440 MPa ASTM D 638
Resistenza alla trazione a rottura 103 MPa ASTM D 638
Allungamento a rottura 2.3 % ASTM D 638
Modulo a flessione 7100 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 53 J/m ASTM D 256
Resistenza all'urto Izod, 1/8 in 469 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 137 °C ISO 75-1/-2
Indice di ossigeno 20 % ISO 4589-1/-2
ASTM Data
UL 94 combustibilitá V-2 - UL 94
Spessore testati 0.75 mm -
coefficiente d’espansione termica, lung. 32 E-6/K ASTM D 696
DTUL a 66 psi 215 °C ASTM D 648
DTUL a 264 psi 204 °C ASTM D 648
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1380 kg/m³ ISO 1183
Assorbimento d’acqua, 24hr 1.05 % ASTM D 570
Densità 1380 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Altre Estrusioni
Forma fisica disponibile
Pellet
Caratteristiche speciali
Ritardante di fiamma
Caratteristiche
Basso odore
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.