Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Styroflex® 2G66 LE - SB - INEOS Styrolution

Material Data Center offers the following functions for Styroflex® 2G66 LE:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Styroflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Proprietà Ottiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 13 cm³/10min ISO 1133
Temperatura 200 °C -
Carico 5 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 120 MPa ISO 527
Carico unitario a trazione 4 MPa ISO 527
Deformazione a snervamento 5 % ISO 527
Modulo a flessione, 23°C 140 MPa ISO 178
Resistenza alla flessione 4 MPa ISO 178
Resist. urto Charpy con intaglio, -30°C 2 kJ/m² ISO 179/1eA
Durezza Shore A 84 - ISO 7619-1
Durezza Shore D 34 - ISO 7619-1
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
Temp.di rammollimento Vicat 35 °C ASTM D 1525
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Resistività volumica 1E13 Ohm*m IEC 62631-3-1
Resistività superficiale 1E15 Ohm IEC 62631-3-2
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Opacità 5 % ASTM D 1003
Trasmissione luminosa 80 % ASTM D 1003
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.07 % Sim. alla ISO 62
Massa volumica 998 kg/m³ ISO 1183
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Altre Estrusioni
Caratteristiche speciali
Trasparente
Caratteristiche
Copolimero
Certifications
Contatto con gli alimenti
Applicazioni
Medicale, Imballaggio
Disponibilità geografica
Europa, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.