Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of STYRON™ A-TECH™ 1400AS - (PS-HI) - Americas Styrenics LLC

Material Data Center offers the following functions for STYRON™ A-TECH™ 1400AS:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Styron datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 9.5 g/10min ASTM D 1238
Temperatura 200 °C -
Carico 5 kg -
Ritiro di stampaggio, parallelo 0.006 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Modulo a trazione 1724 MPa ASTM D 638
Resistenza alla trazione 22.1 MPa ASTM D 638
Resistenza alla trazione a rottura 21.4 MPa ASTM D 638
Modulo a flessione 1724 MPa ASTM D 790
Resistenza alla flessione 31 MPa ASTM D 790
Durezza Rockwell R 103 - ASTM D 785
Resistenza all'urto Izod con intaglio, 1/8 in 107 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
coefficiente d’espansione termica, lung. 90 E-6/K ASTM D 696
DTUL a 66 psi 87.8 °C ASTM D 648
DTUL a 264 psi 77.8 °C ASTM D 648
Temp.di rammollimento Vicat 100 °C ASTM D 1525
Altre ProprietàValoreUnitáNorma del test
Densità 1040 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Temperatura dello stampo 17 - 65 °C -
Zona 1 218 - 249 °C -
Zona 2 218 - 249 °C -
Zona 3 199 - 213 °C -
Temperatura dell ugello 213 - 243 °C -
Contropressione 0.172 - 1.21 MPa -
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Temperatura di fusione 193 - 232 °C -
Zona 1 177 - 193 °C -
Zona 2 182 - 204 °C -
Zona 3 188 - 210 °C -
Zona 4 199 - 216 °C -
Zona 5 204 - 221 °C -
Temperatura dell ugello 199 - 232 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Altre Estrusioni
Certifications
Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti secondo la FDA 21 CFR
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.