Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Topas® 9506F-500 - COC - Topas Advanced Polymers

Material Data Center offers the following functions for Topas® 9506F-500:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Topas datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Termiche - Altre Proprietà - Proprietà Meccaniche (Film) - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 6 cm³/10min ISO 1133
Temperatura 230 °C -
Carico 2.16 kg -
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di transizione vetrosa, 10°C/min 65 °C ISO 11357-1/-2
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.01 % Sim. alla ISO 62
Massa volumica 1010 kg/m³ ISO 1183
Proprietà Meccaniche (Film)ValoreUnitáNorma del test
ISO Data
Modulo a trazione, parallelo 1800 MPa ISO 527-3
Modulo a trazione, perpend. 1700 MPa ISO 527-3
Carico unitario a rottura, parallelo 52 MPa ISO 527-3
Carico unitario a rottura, perpend. 51 MPa ISO 527-3
Allungamento massimo, parallelo 3.1 % ISO 527-3
Allungamento massimo, perpend. 3.1 % ISO 527-3
Tipo di estrusione cast - -
Spessore del provino 0.1 mm -
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Type of extrusion film - -
Zona 1 200 - 210 °C -
Zona 2 200 - 210 °C -
Zona 3 200 - 210 °C -
Zona 4 200 - 210 °C -
Temperatura dell ugello 220 - 230 °C -
Caratteristiche
Processabilità e Forma di Forni
Estrusione Film, Altre Estrusioni
Caratteristiche
Miscela di resina
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.