Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TORAYCON® 1100M - PBT - Toray Industries, Inc.

Material Data Center offers the following functions for TORAYCON® 1100M:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Toraycon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
This material is also produced by Toray Plastics (Malaysia).
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 59 cm³/10min ISO 1133
Temperatura 250 °C -
Carico 2.16 kg -
ASTM Data
Indice di fluidità a caldo, MFI 31 g/10min ASTM D 1238
Temperatura 250 °C -
Carico 1 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Resistenza a trazione 60 MPa ISO 527
Deformazione a rottura 32 % ISO 527
Modulo a flessione, 23°C 2500 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 4.4 kJ/m² ISO 179/1eA
ASTM Data
Resistenza alla trazione 57 MPa ASTM D 638
Allungamento a rottura 27 % ASTM D 638
Modulo a flessione 2500 MPa ASTM D 790
Resistenza alla flessione 84 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 36 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 224 °C ISO 11357-1/-3
ASTM Data
Temperatura di fusione 224 °C ASTM D 3418
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1310 kg/m³ ISO 1183
Viscosità intrinseca 0.85 dl/g -
Densità 1310 kg/m³ ASTM D 792
Caratteristiche
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.