Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrasint™ TPU 88A - TPU - BASF

Material Data Center offers the following functions for Ultrasint™ TPU 88A:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultrasint datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - 3D Data
Any use of this information falls under the rules of our disclaimer.
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Durezza Shore A 89 - ISO 7619-1
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 135 °C ISO 11357-1/-3
Temperatura di transizione vetrosa, 10°C/min -48 °C ISO 11357-1/-2
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1100 kg/m³ ISO 1183
Bulk density 500 kg/m³ -
3D DataValoreUnitáNorma del test
Other Standards[S]
Modulo a trazione, flat 75 MPa ISO 527
Modulo a trazione, upright 75 MPa ISO 527
Resistenza a trazione, flat 8 MPa ISO 527
Resistenza a trazione, upright 7 MPa ISO 527
Deformazione a rottura, flat 270 % ISO 527
Deformazione a rottura, upright 130 % ISO 527
Modulo a flessione, flat 70 MPa ISO 178
Modulo a flessione, upright 70 MPa ISO 178
Resistenzia all'urto Charpy con intaglio, +23°C, flat 0 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, +23°C, upright 0 kJ/m² ISO 179/1eA
Temp.di rammollimento Vicat, A, flat 98 °C ISO 306
Temp.di rammollimento Vicat, A, upright 98 °C ISO 306
S: These properties are reported by the producer according standards that are different to our defaults.
Caratteristiche
Processabilità e Forma di Forni
Additive Manufacturing, Sinterizzazione a laser
Forma fisica disponibile
Polveri, Bianco
Caratteristiche speciali
Estab. agli U.V. o per applicaz.in esterni
Resistenza Chimica
Stabilità idrolitica
Applicazioni
Attrezzature sportive
Disponibilità geografica
Nord America, Europa, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.