Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrasint PA6 - PA6 - BASF

Material Data Center offers the following functions for Ultrasint PA6:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultrasint datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Termiche - Altre Proprietà - 3D Data
Any use of this information falls under the rules of our disclaimer.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 24 / * cm³/10min ISO 1133
Temperatura 240 / * °C -
Carico 2.16 / * kg -
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 220 / * °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 103 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 192 / * °C ISO 75-1/-2
Temp.di rammollimento Vicat, A 217 / * °C ISO 306
Temp.di rammollimento Vicat, B 198 / * °C ISO 306
Altre Proprietàsecco/condUnitáNorma del test
Massa volumica 1150 / - kg/m³ ISO 1183
Bulk density 520 kg/m³ -
3D Datasecco/condUnitáNorma del test
Other Standards[S]
Modulo a trazione, flat 3700 / 1700 MPa ISO 527
Modulo a trazione, upright 3800 / 1850 MPa ISO 527
Resistenza a trazione, flat 66 / 47 MPa ISO 527
Resistenza a trazione, upright 56 / 38 MPa ISO 527
Deformazione a rottura, flat 2 / 16 % ISO 527
Deformazione a rottura, upright 1.6 / 4.4 % ISO 527
Modulo a flessione, flat 3350 / 1800 MPa ISO 178
Modulo a flessione, upright 3600 / 1900 MPa ISO 178
Resistenza all'urto Charpy, +23°C, flat 7.5 / 6.8 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, +23°C, upright 4.7 / 5.4 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C, flat 2.2 / 2 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, +23°C, upright 1.7 / 1.6 kJ/m² ISO 179/1eA
Resistenza all'urto Izod, +23°C, flat 7.2 / 7.1 kJ/m² ISO 180/1U
Resistenza all'urto Izod, +23°C, upright 5.4 / 4.8 kJ/m² ISO 180/1U
Resistenza all'urto Izod con intaglio, +23°C, flat 2.6 / 3.2 kJ/m² ISO 180/1A
Resistenza all'urto Izod con intaglio, +23°C, upright 2.4 / 2.9 kJ/m² ISO 180/1A
S: These properties are reported by the producer according standards that are different to our defaults.
Caratteristiche
Processabilità e Forma di Forni
Additive Manufacturing, Sinterizzazione a laser
Forma fisica disponibile
Polveri, Colore naturale
Caratteristiche
Stabilità termica
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.