Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTODUR® X7396 - PBT - Evonik Operations GmbH

Material Data Center offers the following functions for VESTODUR® X7396:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestodur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Funzioni
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Low-shrinkage, polymer-modified polybutylene terephthalate compound

VESTODUR® X7396 is an unreinforced, heat-stabilized and polymer-modified poly­butylene terephthalate (PBT) compound with low shrinkage for extrusion.

 

The compound is especially suitable for the manufacture of stiff, small-diameter tubing, e.g. loose buffering for fiber optics. 

 

Compared with standard PBT compounds VESTODUR® X7396 has a higher hardness. This permits cable jacketing as a protective cover against rodent attacks.

 

VESTODUR® X7396 is supplied as cylindrical pellets in polyethylene packaging.

 

In the brochure "Engineering thermoplastics for high performance secondary fiber optic jacketing" instructions are given on the extrusion of loose or tight buffering for fiber optics. 

 

For information please follow the general recommendations in our flyer "VESTODUR® Polybutylene terephthalate - Compounds".

 

Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at tempIeratures not exceeding 30°C.

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTODUR.COM

Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 43 cm³/10min ISO 1133
Temperatura 250 °C -
Carico 10 kg -
Ritiro di stampaggio, parallelo 1.3 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 1.3 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 2600 MPa ISO 527
Carico unitario a trazione 65 MPa ISO 527
Deformazione a snervamento 4 % ISO 527
Deformazione nominale a rottura >50 % ISO 527
Resistenza all'urto Charpy, +23°C N kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 220 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 5.5 kJ/m² ISO 179/1eA
Type of failure C - -
Resistenzia all'urto Charpy con intaglio, -30°C 4.5 kJ/m² ISO 179/1eA
Type of failure C - -
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 220 °C ISO 11357-1/-3
Temperatura di transizione vetrosa, 10°C/min 56 °C ISO 11357-1/-2
Temp.di inflessione sotto carico, 1.80 MPa 65 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 85 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 115 °C ISO 306
Reaz. al fuoco spess.nom. 1.5mm HB class IEC 60695-11-10
Spessore provato 1.6 mm -
Reazione al fuoco a spessore h HB class IEC 60695-11-10
Spessore provato 0.8 mm -
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.48 % Sim. alla ISO 62
Assorbimento d'umidità 0.35 % Sim. alla ISO 62
Massa volumica 1250 kg/m³ ISO 1183
Funzioni
Volume specifico-temperatura (pvT) , VESTODUR® X7396, PBT, Evonik
Caratteristiche
Processabilità e Forma di Forni
Estrusione Film, Estrusione di tubi, Altre Estrusioni
Forma fisica disponibile
Pellet
Caratteristiche speciali
Estab. agli U.V. o per applicaz.in esterni, Stabilizzato o stabile al calore
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.