Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vistamaxx™ 3000 - TPO - ExxonMobil Chemical

Material Data Center offers the following functions for Vistamaxx™ 3000:
unit conversion, PDF datasheet print

Check here, which other Vistamaxx datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 3.7 g/10min ASTM D 1238
Temperatura 190 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
Other Standards[S]
Resistenza alla trazione di snervamento 5.24 MPa ExxonMobil Method
Resistenza alla trazione a rottura 13.8 MPa ExxonMobil Method
Allungamento a snervamento 40 % ExxonMobil Method
Allungamento a rottura 800 % ExxonMobil Method
Modulo a 100% allungamento 4.69 MPa ExxonMobil Method
Modulo a 300% allungamento 1.61 MPa ExxonMobil Method
Durezza D Shore 27 - ExxonMobil Method
Resistenza alla lacerazione 63.9 kN/m ExxonMobil Method
S: These properties are reported by the producer according standards that are different to our defaults.
Proprietà TermicheValoreUnitáNorma del test
Other Standards[S]
Temp.di rammollimento Vicat 65 °C ExxonMobil Method
S: These properties are reported by the producer according standards that are different to our defaults.
Altre ProprietàValoreUnitáNorma del test
Other Standards[S]
Densità 873 kg/m³ ExxonMobil Method
S: These properties are reported by the producer according standards that are different to our defaults.
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Estrusione di film in bolla, Estrusione Film, Estrusione di Lastre/Fogli, Calandratura
Forma fisica disponibile
Pellet
Caratteristiche
Miscela di resina, Buona adesione, Termosaldatura
Resistenza Chimica
Resistenza chimica generale
Certifications
RoHS
Applicazioni
Imballaggio
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.