Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® R220 - PA66-MX40 - Ascend

Material Data Center offers the following functions for Vydyne® R220:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Vydyne R220 is a 40% mineral-reinforced PA66 resin formulated for improved impact strength. Available in natural, it is an injection-molding grade formulated to retain the inherent processing advantages of unreinforced PA66 while enhancing rigidity, strength and heat resistance. R220 maintains the chemical resistance typical of PA66 to a wide variety of chemicals, gasoline, oils, greases and solvents.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 1.1 / * % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 1.0 / * % ISO 294-4, 2577
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 6900 / 2600 MPa ISO 527
Carico unitario a trazione 103 / 73 MPa ISO 527
Deformazione a snervamento 1.5 / 16 % ISO 527
Resistenza all'urto Charpy, +23°C 140 / N kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 110 / 130 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 7 / 17 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C 6 / 8 kJ/m² ISO 179/1eA
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 258 / * °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 118 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 222 / * °C ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo 63 / * E-6/K ISO 11359-1/-2
Coeff.di dilatazione termica lin., perpend. 60 / * E-6/K ISO 11359-1/-2
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 1.1 / * % Sim. alla ISO 62
Assorbimento d'umidità 1.6 / * % Sim. alla ISO 62
Massa volumica 1480 / - kg/m³ ISO 1183
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet, Colore naturale
Caratteristiche speciali
Alto urto o modificato all'urto, Stabilizzato o stabile al calore
Caratteristiche
Duro
Resistenza Chimica
Resistenza chimica generale, Resistenza ai solventi, Resistenza al grasso, Resistenza all’olio
Applicazioni
Automotive
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.