Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VYPET VNT 340 - PET-(GF+MX)40 - Lavergne

Material Data Center offers the following functions for VYPET VNT 340:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vypet datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Ritiro di stampaggio, parallelo 0.0032 mm/mm ASTM D 955
Ritiro di stampaggio, perpend. 0.0079 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Carico unitario a rottura 111 MPa ISO 527
Modulo a flessione, 23°C 10500 MPa ISO 178
Resistenza all'urto Izod con intaglio, +23°C 6.7 kJ/m² ISO 180/1A
ASTM Data
Resistenza a compressione 151 MPa ASTM D 695
Durezza Rockwell R 113 - ASTM D 785
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 249 °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 224 °C ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo 17 E-6/K ISO 11359-1/-2
Coeff.di dilatazione termica lin. , perpend. 87 E-6/K ISO 11359-1/-2
ASTM Data
UL 94 combustibilitá HB - UL 94
Spessore testati 0.75 mm -
Proprietà ElettricheValoreUnitáNorma del test
ASTM Data
Rigidità elettrica, breve periodo di tempo 21.9 kV/mm ASTM D 149
Resistenza di volume >1E15 Ohm*cm ASTM D 257
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1640 kg/m³ ISO 1183
Assorbimento d’acqua, 24hr 0.06 % ASTM D 570
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche speciali
Stabilizzato o stabile al calore
Applicazioni
Elettrotecnica ed electrici
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.