Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of WELLAMID 6000 CF 18 HWCP - PA6-CF18 - CP-Polymer-Technik GmbH & Co.KG

Material Data Center offers the following functions for WELLAMID 6000 CF 18 HWCP:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Wellamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 0.3 / * % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 0.9 / * % ISO 294-4, 2577
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 13000 / 9500 MPa ISO 527
Resistenza a trazione 160 / 100 MPa ISO 527
Deformazione a rottura 2 / 4.5 % ISO 527
Modulo a flessione, 23°C 11500 / - MPa ISO 178
Resistenza all'urto Charpy, +23°C 40 / 75 kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 6 / 17 kJ/m² ISO 179/1eA
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 223 / * °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 190 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 215 / * °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 200 / * °C ISO 306
Coeff.di dilatazione termica lin., parallelo 25 / * E-6/K ISO 11359-1/-2
Reaz. al fuoco spess.nom. 1.5mm HB / * class IEC 60695-11-10
Spessore provato 1.5 / * mm -
Reazione al fuoco a spessore h HB / * class IEC 60695-11-10
Spessore provato 3.0 / * mm -
Proprietà Elettrichesecco/condUnitáNorma del test
ISO Data
Resistività volumica 10 / 100 Ohm*m IEC 62631-3-1
Resistività superficiale * / 100000 Ohm IEC 62631-3-2
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'umidità 2.2 / * % Sim. alla ISO 62
Massa volumica 1200 / - kg/m³ ISO 1183
Caratteristiche
Caratteristiche speciali
Migliorata conduttività elettrica, Stabilizzato o stabile al calore
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.