Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CELANEX® 3315-16 - PBT-GF30 - Celanese

Material Data Center offers the following functions for CELANEX® 3315-16:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Celanex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
This is a preliminay data sheet.
Celanex 3315-16 is a flame retarded, 30% fiberglass reinforced polybutylene terephthalate which has an excellent balance of mechanical properties and processability. It is well suited for electrical connector applications

Flammability at thickness h (1.6 mm)V-0-
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 0.3 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 1.0 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Carico unitario a rottura 145 MPa ISO 527
Deformazione a rottura 2.3 % ISO 527
Resistenzia all'urto Charpy con intaglio, +23°C 8.5 kJ/m² ISO 179/1eA
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 225 °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 205 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 215 °C ISO 75-1/-2
Reazione al fuoco a spessore h V-0 class IEC 60695-11-10
Spessore provato 1.6 mm -
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Resistività volumica >1E13 Ohm*m IEC 62631-3-1
Rigidità dielettrica 22 kV/mm IEC 60243-1
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.3 % Sim. alla ISO 62
Massa volumica 1630 kg/m³ ISO 1183
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet
Additivi
Lubrificanti
Caratteristiche speciali
Ritardante di fiamma
Applicazioni
Elettrotecnica ed electrici
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.