Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ChronoFlex C® 80A - TPU - AdvanSource Biomaterials

Material Data Center offers the following functions for ChronoFlex C® 80A:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Chronoflex C datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
For more detailed information, please read our brochure p. 46 to 54
or contact our representatives in your region.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 14 g/10min ASTM D 1238
Temperatura 205 °C -
Carico 3.26 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Resistenza alla trazione 46.5 MPa ASTM D 638
Allungamento a rottura 400 % ASTM D 638
Durezza A Shore 80 - ASTM D 2240
Altre ProprietàValoreUnitáNorma del test
Assorbimento d’acqua, equilibrio 1 % ASTM D 570
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 71.1 - 93.3 °C -
Pre-essiccamento - Tempo 3 - 4 h -
Umidità del Processo ≤0.05 % -
Temperatura di fusione 199 - 221 °C -
Zona 1 149 - 171 °C -
Zona 2 154 - 177 °C -
Zona 3 182 - 204 °C -
Temperatura dell ugello 188 - 210 °C -
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 71.1 - 93.3 °C -
Pre-essiccamento - Tempo 3 - 4 h -
Umidità del Processo ≤0.05 % -
Temperatura di fusione 199 - 221 °C -
Zona 1 149 - 171 °C -
Zona 2 154 - 177 °C -
Zona 3 182 - 204 °C -
Temperatura dell ugello 188 - 210 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Altre Estrusioni
Forma fisica disponibile
Pellet
Resistenza Chimica
Resistenza chimica generale, Resistenza alla rottura da stress ambientale
Certifications
Contiene risorse rinnovabili, Grado medico, Biocompatibility ISO 10993, Approvazione della USP class VI
Applicazioni
Medicale
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.