Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CYROLITE® Med 2 - MBS - Röhm GmbH

Material Data Center offers the following functions for CYROLITE® Med 2:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Cyrolite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Ottiche - Altre Proprietà - Funzioni
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto

Productprofil:

CYROLITE Med 2 compound is an impact-modified acrylic-based multipolymer for molding and extrusion of medical applications.

Typical properties of CYROLITE® acrylic-based multipolymer compounds are:


• excellent chemical resistance to fats and oils
• excellent bonding and welding capabilities
• excellent bonding to PVC tubing
• good impact strength
• good light transmission
• good resistance to EtO, gamma and E-beam sterilization

 

The special properties of CYROLITE Med 2 compound are:


• superior resistance to lipids
• superior resistance to alcohol
• excellent ductility

Application:

Used for injection molding and extrusion of medical devices.

Example:

Needle hubs, blood separator, IV, lab and pediatric filters.

Processing:

CYROLITE Med 2 compound can be processed in injection molding machines and extrusion lines with 3- zone general purpose screws.

Physical Form / Packaging:

Available in 1500 lb. gaylord boxes; other packaging available on request.

Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 0.6 cm³/10min ISO 1133
Temperatura 230 °C -
Carico 3.8 kg -
Densità del fuso 850 kg/m³ -
Temperatura di estrazione 61 °C -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 1600 MPa ISO 527
Carico unitario a trazione 31 MPa ISO 527
Deformazione a snervamento 3.6 % ISO 527
Deformazione nominale a rottura 33 % ISO 527
Resistenza all'urto Charpy, +23°C 174 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 101 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 7.7 kJ/m² ISO 179/1eA
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 76 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 82 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 80.5 °C ISO 306
Proprietà OtticheValoreUnitáNorma del test
ISO Data
Trasmittanza luminosa 86 % ISO 13468-1, -2
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1090 kg/m³ ISO 1183
Funzioni
Viscosità-Velocità di taglio , CYROLITE® Med 2, MBS, Röhm
Sforzo di taglio-Velocità di taglio , CYROLITE® Med 2, MBS, Röhm
Sforzi-deformazione , CYROLITE® Med 2, MBS, Röhm
Modulo secante-deformazione , CYROLITE® Med 2, MBS, Röhm
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Altre Estrusioni
Forma fisica disponibile
Pellet
Caratteristiche speciali
Alto urto o modificato all'urto, Trasparente, Sterilizzabile, Sterilizzazione ad ossido di etilene (EtO), Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Caratteristiche
Duro, Buona adesione, Saldabile
Resistenza Chimica
Resistenza al grasso, Resistenza all’olio
Applicazioni
Medicale
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Altre informazioni
Stampaggio ad Iniezione


PREPROCESSING
Predrying temperature: max. 70 °C
Predrying time : 3 - 4 h

PROCESSING
Melt temperature: 215 - 250°C
Mold temperature:50 - 80°C|

Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.