Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Eastar™ BR403 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Eastar™ BR403:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Eastar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto

Eastar™ BR403 copolyester is a water-clear polymer that is great for toothbrush applications. It will not crystallize and thus offers wider processing latitude than conventional crystallizable polyesters while still providing an excellent combination of clarity, toughness, and melt strength.


Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Modulo a flessione 2060 MPa ASTM D 790
Durezza Rockwell R 108 - ASTM D 785
Resistenza all'urto Izod con intaglio, 1/8 in 105 J/m ASTM D 256
Resistenza all'urto Izod con intaglio, basso temperatura 40 J/m ASTM D 256
Temperatura -40 °C -
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Opacità 0.2 % ASTM D 1003
Trasmissione luminosa 90 % ASTM D 1003
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 70 °C -
Pre-essiccamento - Tempo 6 h -
Temperatura di fusione 249 - 271 °C -
Temperatura dello stampo 16 - 38 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche speciali
Trasparente
Caratteristiche
Resistenza del fuso, Copolimero
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.