Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® 590 A - (TPU-ARES) - BASF Polyurethanes GmbH

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Preparazione Provette - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

DESCRIPTION
Elastollan 590 A is a polyester based TPU

SPECIAL PROPERTIES
good abrasion resistance

TYPICAL APPLICATIONS
roller tyres for conveyor systems and shopping trolleys, heel taps

OTHER HINTS
predrying: 2-3h at 100 bis 110°C,
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance

Proprietà Meccaniche	Valore	Unitá	Norma del test
ISO Data
Carico unitario al 50% di deformazione	7	MPa	ISO 527
Deformazione a rottura	>50	%	ISO 527
Carico Unitario al 100% di allungamento	11	MPa	ISO 527
Carico Unitario al 300% di allungamento	19	MPa	ISO 527
Carico Unitario a rottura TPE	50	MPa	ISO 527
Allungamento a rottura TPE	>300	%	ISO 527
Resistenza alla lacerazione	100	kN/m	ISO 34-1
Resistenza all'abrasione	35	mm³	ISO 4649
Durezza Shore A	94	-	ISO 7619-1
Durezza Shore D	39	-	ISO 7619-1

Proprietà Termiche	Valore	Unitá	Norma del test
ISO Data
Temperatura di transizione vetrosa, 10°C/min	-16	°C	ISO 11357-1/-2

Proprietà Elettriche	Valore	Unitá	Norma del test
ISO Data
Res. Alle correnti striscianti superficiali	600	-	IEC 60112

Altre Proprietà	Valore	Unitá	Norma del test
Massa volumica	1250	kg/m³	ISO 1183

Preparazione Provette	Valore	Unitá	Norma del test
ISO Data
Stamp. ad Iniezione, temp. di fusione	215	°C	ISO 294
Stamp. ad Iniezione, temperatura dello stampo	60	°C	ISO 294

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione

Forma fisica disponibile

Pellet

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa

Altre informazioni

Stampaggio ad Iniezione

Barrel temperature : 200 - 215 °C
Melt temperature : 215 °C
Mold temperature: 25 - 40 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.