Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Evoprene® G 614 - TPE - Alphagary

Material Data Center offers the following functions for Evoprene® G 614:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Evoprene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 5 g/10min ISO 1133
Temperatura 260 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Resistenza a trazione 9.3 MPa ISO 37
Deformazione a rottura 552 % ISO 37
Deformazione residua dopo compressione a 70°C, 24h 78 % ISO 815
Deformazione residua dopo compressione a 100°C, 24h 88 % ISO 815
Durezza Shore A 91 - ISO 7619-1
Durezza Shore D 30 - ISO 7619-1
ASTM Data
Modulo a flessione 131 MPa ASTM D 790
Other Standards[S]
Carico Unitario al 100% di allungamento 5.8 MPa ISO 37
Carico Unitario al 300% di allungamento 21.3 MPa ISO 37
Resistenza alla lacerazione 60 kN/m ISO 6383
S: These properties are reported by the producer according standards that are different to our defaults.
Altre ProprietàValoreUnitáNorma del test
Other Standards[S]
Massa volumica 890 kg/m³ ISO 2781
S: These properties are reported by the producer according standards that are different to our defaults.
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Disponibilità geografica
Nord America, Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.