Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORTRON® FX72T6 - PPS - Celanese

Check here, which other Fortron datasheets, application examples or technical articles are available in Material Data Center

Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

Fortron^® FX72T6 is an unreinforced, impact modified PPS with high flowability and high impact resistance suitable for injection molding.
The mechanical properties reported on this data sheet refer to a mold wall temperature of 135°C.

Flammability at thickness h (3 mm)

V-0

-

Caratteristiche Fisiche	Valore	Unitá	Norma del test
ISO Data
Ritiro di stampaggio, parallelo	1.3	%	ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare	1.3	%	ISO 294-4, 2577

Proprietà Meccaniche	Valore	Unitá	Norma del test
ISO Data
Modulo a trazione	1680	MPa	ISO 527
Carico unitario a rottura	40	MPa	ISO 527
Deformazione a rottura	20	%	ISO 527
Resistenza all'urto Charpy, +23°C	N	kJ/m²	ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C	10	kJ/m²	ISO 179/1eA

Proprietà Termiche	Valore	Unitá	Norma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa	100	°C	ISO 75-1/-2
Temp.di rammollimento Vicat, B	122	°C	ISO 306
Reazione al fuoco a spessore h	V-0	class	IEC 60695-11-10
Spessore provato	3.0	mm	-
Indice di ossigeno	48.5	%	ISO 4589-1/-2

Proprietà Elettriche	Valore	Unitá	Norma del test
ISO Data
Costante dielettrica relativa, 1MHz	3.1	-	IEC 62631-2-1
Fattore di dissipazione, 1MHz	3	E-4	IEC 62631-2-1

Altre Proprietà	Valore	Unitá	Norma del test
Massa volumica	1180	kg/m³	ISO 1183

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione

Caratteristiche speciali

Alto urto o modificato all'urto

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.