Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORTRON® ICE 504L - PPS-GF40 - Celanese

Check here, which other Fortron datasheets, application examples or technical articles are available in Material Data Center

Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

FORTRON ICE 504L is a 40% glass fiber reinforced polyphenylene sulfide, that belongs to our new generation of Fortron® PPS.
This new technology allows optimization of molding conditions with faster cycle times. Due to the faster crystallization of the material at a higher temperature, the option of mold wall temperature reduction can be subject of advanced process optimization. The potential for optimization of Fortron® ICE by cycle time reduction is possible by standard cavity surface temperatures of 140°C. The potential for lowering the mold temperature must be checked individually and it depends on process and part design.
 

Flammability @1.6mm nom. thickn.	V-0	-
Flammability at thickness h (0.38 mm)	V-0	-

Caratteristiche Fisiche	Valore	Unitá	Norma del test
ISO Data
Ritiro di stampaggio, parallelo	0.3	%	ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare	0.6	%	ISO 294-4, 2577
Capacità termica specifica del fuso	1500	J/(kg K)	-

Proprietà Meccaniche	Valore	Unitá	Norma del test
ISO Data
Modulo a trazione	15100	MPa	ISO 527
Carico unitario a rottura	202	MPa	ISO 527
Deformazione a rottura	1.9	%	ISO 527
Resistenza all'urto Charpy, +23°C	53	kJ/m²	ISO 179/1eU
Resistenza all'urto Charpy, -30°C	53	kJ/m²	ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C	10	kJ/m²	ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C	10	kJ/m²	ISO 179/1eA

Proprietà Termiche	Valore	Unitá	Norma del test
ISO Data
Temperatura di fusione, 10°C/min	280	°C	ISO 11357-1/-3
Temperatura di transizione vetrosa, 10°C/min	90	°C	ISO 11357-1/-2
Temp.di inflessione sotto carico, 1.80 MPa	270	°C	ISO 75-1/-2
Temp.di inflessione sotto caricor, 8.00 MPa	215	°C	ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo	26	E-6/K	ISO 11359-1/-2
Coeff.di dilatazione termica lin., perpend.	42	E-6/K	ISO 11359-1/-2
Reaz. al fuoco spess.nom. 1.5mm	V-0	class	IEC 60695-11-10
Spessore provato	1.5	mm	-
Reazione al fuoco a spessore h	V-0	class	IEC 60695-11-10
Spessore provato	0.4	mm	-
Indice di ossigeno	47	%	ISO 4589-1/-2

Proprietà Elettriche	Valore	Unitá	Norma del test
ISO Data
Costante dielettrica relativa, 1MHz	4.1	-	IEC 62631-2-1
Fattore di dissipazione, 1MHz	20	E-4	IEC 62631-2-1
Resistività volumica	>1E13	Ohm*m	IEC 62631-3-1
Resistività superficiale	>1E15	Ohm	IEC 62631-3-2

Altre Proprietà	Valore	Unitá	Norma del test
Assorbimento d'acqua	0.02	%	Sim. alla ISO 62
Massa volumica	1650	kg/m³	ISO 1183

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione

Forma fisica disponibile

Pellet

Additivi

Agente di distacco

Certifications

Contatto con acqua potabile

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.