Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Genestar™ G1300H-F02 - PA9T-GF30 - Kuraray Co., Ltd.

Check here, which other Genestar datasheets, application examples or technical articles are available in Material Data Center

Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

GENESTAR G1300H-F02 is an injection molding grade with 30% GF developed for reflow applications. It is halogen-free and has a HB flammability.

Thanks to its JEDEC MSL 1 rating (moisture sensitive level 1), this grade shows an excellent resistance to blisters.

GENESTAR G1300H-F02 is suitable for all kind of reflow components such as:
- FPC connectors
- Board-to-board connectors
- wire-to-board connectors
- automotive connectors

Caratteristiche Fisiche	Valore	Unitá	Norma del test
ISO Data
Ritiro di stampaggio, parallelo	0.3	%	ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare	1.0	%	ISO 294-4, 2577
ASTM Data
Indice di fluidità a caldo, MFI	45	g/10min	ASTM D 1238
Temperatura	320	°C	-
Carico	2.16	kg	-

Proprietà Meccaniche	Valore	Unitá	Norma del test
ISO Data
Modulo a trazione	9500	MPa	ISO 527
Carico unitario a rottura	151	MPa	ISO 527
Deformazione a rottura	1.9	%	ISO 527
Resistenzia all'urto Charpy con intaglio, +23°C	11	kJ/m²	ISO 179/1eA
ASTM Data
Resistenza alla trazione	160	MPa	ASTM D 638
Modulo a flessione	8500	MPa	ASTM D 790
Resistenza alla flessione	205	MPa	ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in	105	J/m	ASTM D 256

Proprietà Termiche	Valore	Unitá	Norma del test
ISO Data
Temperatura di fusione, 10°C/min	306	°C	ISO 11357-1/-3
Temperatura di transizione vetrosa, 10°C/min	125	°C	ISO 11357-1/-2
Temp.di inflessione sotto carico, 1.80 MPa	290	°C	ISO 75-1/-2
Reaz. al fuoco spess.nom. 1.5mm	HB	class	IEC 60695-11-10
ASTM Data
UL 94 combustibilitá	HB	-	UL 94
DTUL a 264 psi	290	°C	ASTM D 648
Temperatura di fusione	306	°C	ASTM D 3418
Temperatura di transizione vetrosa	125	°C	ASTM E 1356

Proprietà Elettriche	Valore	Unitá	Norma del test
ISO Data
Rigidità dielettrica	28	kV/mm	IEC 60243-1
Res. Alle correnti striscianti superficiali	600	-	IEC 60112
ASTM Data
Rigidità elettrica, breve periodo di tempo	30	kV/mm	ASTM D 149
Resistenza di volume	>1E15	Ohm*cm	ASTM D 257

Altre Proprietà	Valore	Unitá	Norma del test
Assorbimento d'acqua	0.18	%	Sim. alla ISO 62
Massa volumica	1370	kg/m³	ISO 1183
Densità	1370	kg/m³	ASTM D 792

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione

Forma fisica disponibile

Pellet

Caratteristiche speciali

Ritardante di fiamma, Senza alogeni, Stabilizzato o stabile al calore

Caratteristiche

Saldabile

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.