Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Greenflex® FD 53 - EVAC - Versalis S.p.A

Material Data Center offers the following functions for Greenflex® FD 53:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Greenflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Ottiche - Proprietà Meccaniche (Film)
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 0.4 g/10min ISO 1133
Temperatura 190 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Durezza Shore A 90 - ISO 7619-1
Durezza Shore D 39 - ISO 7619-1
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 88 °C ISO 11357-1/-3
Coeff.di dilatazione termica lin., parallelo 35 E-6/K ISO 11359-1/-2
Proprietà OtticheValoreUnitáNorma del test
ISO Data
Brillantezza, 45° 72 - ISO 2813
Opacità 8 - ISO 14782
Proprietà Meccaniche (Film)ValoreUnitáNorma del test
ISO Data
Carico allo snervamento, parallelo 4.5 MPa ISO 527-3
Carico allo snervamento, normal 4 MPa ISO 527-3
Carico unitario a rottura, perpend. 30 MPa ISO 527-3
Allungamento massimo, parallelo 450 % ISO 527-3
Allungamento massimo, perpend. 700 % ISO 527-3
Coefficiente attrito dinamico 0.5 - ISO 8295
Tipo di estrusione blown - -
Spessore del provino 0.07 mm -
Caratteristiche
Processabilità e Forma di Forni
Estrusione di film in bolla
Forma fisica disponibile
Pellet
Additivi
Agente antibloccante
Caratteristiche
Buona adesione, Copolimero
Disponibilità geografica
Europa, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.