Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hostalen CRP 100 BLACK - (PE-HD) - LyondellBasell Industries

Material Data Center offers the following functions for Hostalen CRP 100 BLACK:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, CAE Interfaces

Check here, which other Hostalen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 6.4 g/10min ISO 1133
Temperatura 190 °C -
Carico 21.6 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Carico unitario a trazione 23 MPa ISO 527
Deformazione a snervamento 8 % ISO 527
Modulo di scorrimento a trazione, 1h 850 MPa ISO 899-1
Modulo di scorrimento a trazione, 1000h 360 MPa ISO 899-1
Resist. urto Charpy con intaglio, +23°C 26 kJ/m² ISO 179/1eA
Resist. urto Charpy con intaglio, -30°C 13 kJ/m² ISO 179/1eA
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di rammollimento Vicat, B 74 °C ISO 306
Altre ProprietàValoreUnitáNorma del test
Massa volumica 959 kg/m³ ISO 1183
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Estrusione di tubi, Estrusione di Lastre/Fogli, Altre Estrusioni, Stampaggio a compressione
Forma fisica disponibile
Nero
Caratteristiche speciali
Estab. agli U.V. o per applicaz.in esterni
Caratteristiche
Resistenza al scorrimento, Saldabile
Resistenza Chimica
Resistenza chimica generale, Resistenza alla rottura da stress ambientale
Certifications
Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti secondo 1935/2004/EG, Approvato per l'utilizzo per contatto con alimenti 10/2011, Contatto con acqua potabile
Disponibilità geografica
Europa, Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.