Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of INNOPOL® CS 2-8940 BA42 GU 7035 - (PP+PE)-Z42 - Inno-Comp Kft.

Material Data Center offers the following functions for INNOPOL® CS 2-8940 BA42 GU 7035:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Innopol datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
For more detailed information, please read our brochure p. 46 to 54
or contact our representatives in your region.
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 1650 MPa ISO 527
Carico unitario a trazione 19 MPa ISO 527
Deformazione a snervamento 7 % ISO 527
Carico unitario a rottura 23 MPa ISO 527
Deformazione a rottura 430 % ISO 527
Modulo a flessione, 23°C 1650 MPa ISO 178
Resistenza all'urto Charpy, +23°C N kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 20 kJ/m² ISO 179/1eA
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 46 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 80 °C ISO 75-1/-2
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1400 kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 80 °C -
Pre-essiccamento - Tempo 2 h -
Umidità del Processo ≤0.07 % -
Temperatura di fusione 230 - 250 °C -
Temperatura dello stampo 15 - 50 °C -
Zona 1 190 - 240 °C -
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Type of extrusion pipe/tube - -
Pre-essiccamento - Temperatura 80 °C -
Pre-essiccamento - Tempo 2 h -
Umidità del Processo ≤0.07 % -
Temperatura di fusione 190 - 230 °C -
Zona 1 180 - 220 °C -
Temperatura dell ugello 190 - 220 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Estrusione di tubi, Altre Estrusioni
Caratteristiche speciali
Estab. agli U.V. o per applicaz.in esterni
Caratteristiche
Copolimero
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.