Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of KRALASTIC™ TE-2200 - ABS - Nippon A&L Inc.

Material Data Center offers the following functions for KRALASTIC™ TE-2200:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Kralastic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Ottiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 28 cm³/10min ISO 1133
Temperatura 220 °C -
Carico 10 kg -
Other Standards[S]
Ritiro di stampaggio, parallelo 0.6 % Producer Method
S: These properties are reported by the producer according standards that are different to our defaults.
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Carico unitario a trazione 39 MPa ISO 527
Modulo a flessione, 23°C 1700 MPa ISO 178
Resistenza alla flessione 58 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 15 kJ/m² ISO 179/1eA
Durezza Rockwell R 105 - ISO 2039-2
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 73 °C ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo 82 E-6/K ISO 11359-1/-2
Proprietà OtticheValoreUnitáNorma del test
ISO Data
Opacità 4.5[1] - ISO 14782
Trasmittanza luminosa 89[1] % ISO 13468-1, -2
1: 2mm
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1100 kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 75 - 80 °C -
Pre-essiccamento - Tempo 3 - 6 h -
Temperatura di fusione 180 - 220 °C -
Temperatura dello stampo 40 - 60 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche speciali
Antistatico, Trasparente
Disponibilità geografica
Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.