Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LATILUB 66-01M G/30 - PA66-GF - LATI Industria Termoplastici S.p.A.

Material Data Center offers the following functions for LATILUB 66-01M G/30:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Latilub datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 0.5 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 0.9 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 9400 MPa ISO 527
Carico unitario a rottura 170 MPa ISO 527
Deformazione a rottura 3.1 % ISO 527
Resistenza all'urto Charpy, +23°C 65 kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 9 kJ/m² ISO 179/1eA
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 255 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 260 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 255 °C ISO 306
ASTM Data
UL 94 combustibilitá HB - UL 94
Spessore testati 0.75 mm -
Proprietà ElettricheValoreUnitáNorma del test
ASTM Data
Resistenza superficiale 1E12 Ohm ASTM D 257
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1380 kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 90 - 100 °C -
Pre-essiccamento - Tempo 3 h -
Temperatura di fusione 275 - 300 °C -
Temperatura dello stampo 70 - 100 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Additivi
Lubrificanti
Caratteristiche
Grado tribologico
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.