Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUMICENE® Supertough 22ST05 - PE - TotalEnergies

Material Data Center offers the following functions for LUMICENE® Supertough 22ST05:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lumicene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 0.5 g/10min ISO 1133
Temperatura 190 °C -
Carico 2.16 kg -
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 113 °C ISO 11357-1/-3
Proprietà OtticheValoreUnitáNorma del test
ISO Data
Opacità 7 - ISO 14782
ASTM Data
Brillantezza 60 - ASTM D 2457
Altre ProprietàValoreUnitáNorma del test
Massa volumica 921 kg/m³ ISO 1183
Proprietà Meccaniche (Film)ValoreUnitáNorma del test
ISO Data
Carico allo snervamento, parallelo 9.8 MPa ISO 527-3
Carico allo snervamento, normal 10.1 MPa ISO 527-3
Carico unitario a rottura, parallelo 65 MPa ISO 527-3
Carico unitario a rottura, perpend. 60 MPa ISO 527-3
Allungamento massimo, parallelo 629 % ISO 527-3
Allungamento massimo, perpend. 686 % ISO 527-3
Prova di caduta del dardo A 1000 g ISO 7765-1
Tipo di estrusione blown - -
Spessore del provino 0.04 mm -
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Type of extrusion blown - -
Temperatura di fusione 180 - 230 °C -
Caratteristiche
Processabilità e Forma di Forni
Estrusione di film in bolla, Estrusione Film
Resistenza Chimica
Resistenza all'ossidazione
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.