Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luminy® LX575 - PLA - TotalEnergies Corbion

Material Data Center offers the following functions for Luminy® LX575:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Luminy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 7 g/10min ISO 1133
Temperatura 210 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 3500 MPa ISO 527
Resistenza a trazione 50 MPa ISO 527
Deformazione a rottura 5 % ISO 527
Resist. urto Charpy con intaglio, +23°C 5 kJ/m² ISO 179/1eA
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 165 °C ISO 11357-1/-3
Temperatura di transizione vetrosa, 10°C/min 60 °C ISO 11357-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 60 °C ISO 75-1/-2
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1240 kg/m³ ISO 1183
Biobased content 100 % -
Moisture Content 0.04 % -
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Type of extrusion film - -
Pre-essiccamento - Temperatura 85 °C -
Pre-essiccamento - Tempo 4 - 6 h -
Temperatura di fusione 180 - 190 °C -
Temperatura - Zona di Alimentazione 20 - 40 °C -
Zona 1 190 - 210 °C -
Temperatura dell ugello 190 - 210 °C -
Caratteristiche
Processabilità e Forma di Forni
Estrusione Film, Altre Estrusioni, Termoformatura
Forma fisica disponibile
Pellet, Bianco
Caratteristiche speciali
Stabilizzato o stabile al calore
Certifications
Contiene risorse rinnovabili, Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti 10/2011, Food contact notification (FCN), Compostabile ISO 13432 (Produttore), Compostabile ISO 13432 (Certificato)
Disponibilità geografica
Nord America, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.