Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUPOY PC 1300-30 - PC - LG Chem

Material Data Center offers the following functions for LUPOY PC 1300-30:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lupoy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Proprietà Ottiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 30 g/10min ASTM D 1238
Temperatura 300 °C -
Carico 1.2 kg -
Ritiro di stampaggio, parallelo 0.006 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Modulo a trazione 2340 MPa ASTM D 638
Resistenza alla trazione di snervamento 60 MPa ASTM D 638
Resistenza alla trazione a rottura 61 MPa ASTM D 638
Allungamento a snervamento 6 % ASTM D 638
Allungamento a rottura 150 % ASTM D 638
Modulo a flessione 2410 MPa ASTM D 790
Resistenza alla flessione 96 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 700 J/m ASTM D 256
Resistenza all'urto Izod, 1/8 in N J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Reaz. al fuoco spess.nom. 1.5mm V-2 class IEC 60695-11-10
Spessore provato 1.6 mm -
Yellow Card disponibile sì - -
Glow Wire Ignition Temperature (GWIT) 850 °C IEC 60695-2-13
GWIT - thickness tested (1) 2 mm -
ASTM Data
UL 94 combustibilitá V-2 - UL 94
Spessore testati 0.5 mm -
coefficiente d’espansione termica, lung. 68 E-6/K ASTM D 696
DTUL a 66 psi 139[ann.] °C ASTM D 648
DTUL a 264 psi 122 °C ASTM D 648
Temp.di rammollimento Vicat 144 °C ASTM D 1525
Indice limite di ossigeno 26 % ASTM D 2863
ann.: annealed
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Res. Alle correnti striscianti superficiali 250 - IEC 60112
ASTM Data
Rigidità elettrica, breve periodo di tempo 17 kV/mm ASTM D 149
Fattore di dissipazione dielèttrica, 60 Hz 0.001 - ASTM D 150
Costante dielèttrica, 60 Hz 3 - ASTM D 150
Resistenza di volume 2E17 Ohm*cm ASTM D 257
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Opacità 1.1 % ASTM D 1003
Trasmissione luminosa 89 % ASTM D 1003
Indice di rifrazione 1.59 - ASTM D 542
Altre ProprietàValoreUnitáNorma del test
Assorbimento d’acqua, 24hr 0.15 % ASTM D 570
Assorbimento d’acqua, equilibrio 0.32 % ASTM D 570
Densità 1200 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Altre Estrusioni
Caratteristiche speciali
Alto urto o modificato all'urto, Stabilizzato o stabile al calore, Trasparente
Applicazioni
Imballaggio
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.