Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of MALECCA K-510 - ABS - Denka Company Limited

Material Data Center offers the following functions for MALECCA K-510:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Malecca datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 20 g/10min ISO 1133
Temperatura 265 °C -
Carico 10 kg -
Ritiro di stampaggio, parallelo 0.8 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 2200 MPa ISO 527
Carico unitario a trazione 41 MPa ISO 527
Carico unitario a rottura 38 MPa ISO 527
Modulo a flessione, 23°C 2100 MPa ISO 178
Resistenza alla flessione 70 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 12 kJ/m² ISO 179/1eA
Durezza Rockwell R 112 - ISO 2039-2
ASTM Data
Modulo a flessione 2050 MPa ASTM D 790
Resistenza alla flessione 71 MPa ASTM D 790
Durezza Rockwell R 114 - ASTM D 785
Resistenza all'urto Izod con intaglio, 1/8 in 157 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 107 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 131 °C ISO 306
Reazione al fuoco a spessore h HB class IEC 60695-11-10
Yellow Card disponibile sì - -
ASTM Data
DTUL a 264 psi 118 °C ASTM D 648
Temp.di rammollimento Vicat 129 °C ASTM D 1525
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1080 kg/m³ ISO 1183
Densità 1080 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 100 - 110 °C -
Pre-essiccamento - Tempo 3 - 4 h -
Temperatura dello stampo 50 - 80 °C -
Zona 1 220 - 240 °C -
Zona 2 230 - 260 °C -
Zona 3 240 - 270 °C -
Temperatura dell ugello 240 - 265 °C -
Velocità di Rotazione della Vite 50 - 80 rpm -
Contropressione 0.5 - 1 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche speciali
Stabilizzato o stabile al calore
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.