Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NIRETAN B F30 AE/V0 - PA6-GF30 - Soredi S.p.a.

Material Data Center offers the following functions for NIRETAN B F30 AE/V0:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Niretan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Ritiro di stampaggio, parallelo 0.0045 mm/mm ASTM D 955
Proprietà Meccanichesecco/condUnitáNorma del test
ASTM Data
Resistenza alla trazione a rottura 140 / - MPa ASTM D 638
Modulo a flessione 8500 / - MPa ASTM D 790
Resistenza alla flessione 180 / - MPa ASTM D 790
Durezza Rockwell R 115 / - ASTM D 785
Resistenza all'urto Izod con intaglio, 1/8 in 86.5 / - J/m ASTM D 256
Resistenza all'urto Izod con intaglio, basso temperatura 67.3 / - J/m ASTM D 256
Temperatura -20 °C -
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Coeff.di dilatazione termica lin. , perpend. 40 / * E-6/K ISO 11359-1/-2
ASTM Data
UL 94 combustibilitá V-0 - UL 94
Spessore testati 1.6 mm -
DTUL a 264 psi 205 °C ASTM D 648
Temperatura di fusione 220 °C ASTM D 3418
Proprietà Elettrichesecco/condUnitáNorma del test
ISO Data
Costante dielettrica relativa, 1MHz 3.8 / 4.2 - IEC 62631-2-1
Fattore di dissipazione, 1MHz 200 / 1200 E-4 IEC 62631-2-1
Resistività volumica 1E13 / 1E10 Ohm*m IEC 62631-3-1
Resistività superficiale * / 1E13 Ohm IEC 62631-3-2
Rigidità dielettrica 34 / 24 kV/mm IEC 60243-1
Altre ProprietàValoreUnitáNorma del test
Assorbimento d’acqua, 24hr 6 % ASTM D 570
Densità 1550 kg/m³ ASTM D 792
Caratteristiche
Caratteristiche speciali
Ritardante di fiamma
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.