Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Nypel® 6235G BK1 - PA6-GF35 - BASF

Material Data Center offers the following functions for Nypel® 6235G BK1:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Nypel datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Nypel 6235G BK1 is a 35% glass reinforced injection molding grade of PA6. Based on recycled polyamide feedstocks, Nypel 6235G BK1 offers a balance of mechanical properties with excellent flow and surface appearance.

Nypel 6235G BK1 is recommended for lawn and power equipment housings, structural furniture components such as seat frames, and automotive and industrial applications.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 76 / * cm³/10min ISO 1133
Temperatura 275 / * °C -
Carico 5 / * kg -
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 10999 / 7854 MPa ISO 527
Carico unitario a rottura 172 / 116 MPa ISO 527
Deformazione a rottura 3.2 / 6.2 % ISO 527
Resistenza all'urto Charpy, +23°C 90 / 104 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 77 / 75 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 17 / 20 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C 14 / 14 kJ/m² ISO 179/1eA
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 218 / * °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 207 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 217 / * °C ISO 75-1/-2
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 1.25 / * % Sim. alla ISO 62
Assorbimento d'umidità 5.1 / * % Sim. alla ISO 62
Massa volumica 1380 / - kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 80 °C -
Pre-essiccamento - Tempo 4 h -
Temperatura di fusione 270 - 290 °C -
Temperatura dello stampo 80 - 90 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Nero
Certifications
Contenuto di resina riciclata
Applicazioni
Automotive
Disponibilità geografica
Nord America
Altre informazioni
Stampaggio ad Iniezione
PREPROCESSING
Pre/Post-processing, Pre-drying, Temperature: 80 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 270 - 290 °C
injection molding, Mold temperature, range: 80 - 90 °C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.