Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® 7033 SP 01 - TPA - ARKEMA

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

Polyether block amide Pebax® 7033 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SP grade has been developed to be heat and UV resistant.


Main applications:

• Athletic foot wear components
• Ski shoes
• Tennis racket bumpers
• Zip fasteners

Packaging:
This grade is delivered dried in sealed packaging (20 or 25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

Proprietà Meccaniche	secco/cond	Unitá	Norma del test
ISO Data
Modulo a trazione	414 / 384	MPa	ISO 527
Carico unitario a trazione	23 / 22	MPa	ISO 527
Deformazione a snervamento	22 / 20	%	ISO 527
Deformazione nominale a rottura	>50 / >50	%	ISO 527
Resistenzia all'urto Charpy con intaglio, +23°C	- / 120	kJ/m²	ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C	- / 20	kJ/m²	ISO 179/1eA
Carico Unitario al 10% di allungamento	22 / *	MPa	ISO 527
Carico Unitario al 100% di allungamento	21 / *	MPa	ISO 527
Carico Unitario a rottura TPE	54 / *	MPa	ISO 527
Allungamento a rottura TPE	>300 / *	%	ISO 527
Resistenza alla lacerazione	149 / *	kN/m	ISO 34-1
Durezza Shore D	61 / *	-	ISO 7619-1

Proprietà Termiche	secco/cond	Unitá	Norma del test
ISO Data
Temperatura di fusione, 10°C/min	172 / *	°C	ISO 11357-1/-3
Temp.di inflessione sotto carico, 0.45 MPa	99 / *	°C	ISO 75-1/-2
Temp.di rammollimento Vicat, B	106 / *	°C	ISO 306
Coeff.di dilatazione termica lin., parallelo	160 / *	E-6/K	ISO 11359-1/-2

Proprietà Elettriche	secco/cond	Unitá	Norma del test
ISO Data
Resistività superficiale	* / 4E13	Ohm	IEC 62631-3-2
Res. Alle correnti striscianti superficiali	* / 600	-	IEC 60112

Altre Proprietà	secco/cond	Unitá	Norma del test
Assorbimento d'acqua	1.1 / *	%	Sim. alla ISO 62
Assorbimento d'umidità	0.7 / *	%	Sim. alla ISO 62
Massa volumica	1010 / -	kg/m³	ISO 1183

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione, Estrusione Film, Estrusione Profilati, Altre Estrusioni, Stampaggio a Trasferimento, Colata, Termoformatura

Forma fisica disponibile

Pellet

Caratteristiche speciali

Galvanizzabile, Stabilizzato o stabile alla luce, Estab. agli U.V. o per applicaz.in esterni, Stabilizzato o stabile al calore

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa

Altre informazioni

Stampaggio ad Iniezione

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 230°C / 260°C / 290°C
- Typical mold temperature : 25 – 60°C
- Drying time and temperature (only necessary for bags opened for more than two hours) : 5-7 hours at 70-80°C

Altre Estrusioni

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 220°C / 235°C / 250°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 5-7 hours at 70-80°C.

Resistenza chimica

Acidi
	Acido solforico (38% da massa) (23°C)
Basi
	Soluzione dell' idrossido del sodio (1% da massa) (23°C)
Alcool
	Etanolo (23°C)
Idrocarburi
	isoottano (23°C)
Chetoni
	Acetone (23°C)
Soluzioni saline
	Soluzione del cloruro dello zinco (50% da massa) (23°C)
Altri
	Acqua (23°C)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.