Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Promyde® BF33 LN - PA6 - Nurel S.A.

Material Data Center offers the following functions for Promyde® BF33 LN:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Promyde datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Termiche - Proprietà Ottiche - Altre Proprietà - Proprietà Meccaniche (Film) - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 220 °C ISO 11357-1/-3
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Opacità 5[1] % ASTM D 1003
1: Chill roll temperature 90ºC
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 9 % Sim. alla ISO 62
Assorbimento d'umidità 3 % Sim. alla ISO 62
Massa volumica 1130 kg/m³ ISO 1183
Moisture Content 0.1 % -
Proprietà Meccaniche (Film)ValoreUnitáNorma del test
ISO Data
Carico allo snervamento, parallelo 34 MPa ISO 527-3
Carico unitario a rottura, parallelo 96 MPa ISO 527-3
Allungamento massimo, parallelo 350 % ISO 527-3
Resistenza alla lacerazione Trouser, parallel 25 N/mm ISO 6383-1
Coefficiente attrito dinamico 0.25 - ISO 8295
WVTR, 23°C/85%r.h. 15 g/(m²*d) ISO 15106-1/-2
Permeabilità all' Ossigeno, 23°C/0%r.h. 25 cm³/(m²*d*bar) ISO 15105-1/-2
Permeabilità all' Ossigeno, 23°C/85%r.h. 40 cm³/(m²*d*bar) ISO 15105-1/-2
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 75 - 80 °C -
Temperatura - Zona di Alimentazione 230 - 240 °C -
Zona 1 250 - 265 °C -
Zona 2 255 - 265 °C -
Temperatura dell ugello 255 - 265 °C -
Caratteristiche
Processabilità e Forma di Forni
Estrusione di film in bolla, Estrusione Film, Altre Estrusioni, Termoformatura
Additivi
Lubrificanti, Agente antibloccante
Caratteristiche speciali
Trasparente
Caratteristiche
Proprietà di barriera, Nucleato
Resistenza Chimica
Resistenza chimica generale
Certifications
Contatto con gli alimenti
Applicazioni
Imballaggio
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.