Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® BESNO MED - PA11 - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

PA11,EHL,22-010
Rilsan® BESNO MED resin is a polyamide 11 produced from a renewable source. This grade dedicated to extrusion offers the highest quality and it is specifically designed to meet the stringent requirements of the medical applications such as minimally invasive devices.
Upon request, letters regarding USP Class VI compliance can be provided.


Main applications:

• Medical tubing
• Catheters

Packaging:
This grade is delivered dried in sealed packaging (44 lb bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

Proprietà Meccaniche	secco/cond	Unitá	Norma del test
ISO Data
Modulo a trazione	- / 1200	MPa	ISO 527
Carico unitario a trazione	- / 40	MPa	ISO 527
Deformazione a snervamento	- / 6	%	ISO 527
Deformazione nominale a rottura	- / >50	%	ISO 527
Resistenzia all'urto Charpy con intaglio, +23°C	- / 15	kJ/m²	ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C	- / 13	kJ/m²	ISO 179/1eA
Durezza Shore D	71 / *	-	ISO 7619-1

Proprietà Termiche	secco/cond	Unitá	Norma del test
ISO Data
Temperatura di fusione, 10°C/min	186 / *	°C	ISO 11357-1/-3

Altre Proprietà	secco/cond	Unitá	Norma del test
Massa volumica	1020 / 1020	kg/m³	ISO 1183
Biobased content	100	%	-

Caratteristiche

Processabilità e Forma di Forni

Estrusione Profilati, Altre Estrusioni

Forma fisica disponibile

Pellet

Certifications

Contiene risorse rinnovabili, Grado medico, Approvazione della USP class VI

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa

Altre informazioni

Altre Estrusioni

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 230°C / 250°C / 280°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 65-80°C.

Resistenza chimica

Acidi
	Acido acetico (5% da massa) (23°C)
	Soluzione acida citrica (10% da massa) (23°C)
	Acido lattico (10% da massa) (23°C)
	Acido cloridrico (36% da massa) (23°C)
	Acido nitrico (40% da massa) (23°C)
	Acido solforico (38% da massa) (23°C)
	Acido solforico (5% da massa) (23°C)
	Soluzione acida cromica (40% da massa) (23°C)
Basi
	Soluzione dell' idrossido del sodio (35% da massa) (23°C)
	Soluzione dell' idrossido del sodio (1% da massa) (23°C)
	Soluzione dell' idrossido di ammonio (10% da massa) (23°C)
Alcool
	Metanolo (23°C)
	Etanolo (23°C)
Idrocarburi
	n-Hexane (23°C)
	Toluene (23°C)
Chetoni
	Acetone (23°C)
Oli minerali
	Olio multigrade del motore di SAE 10W40 (23°C)
	Olio multigrade del motore di SAE 10W40 (130°C)
	Olio dell' ipoide-ingranaggio di SAE 80/90 (130°C)
	Olio isolante (23°C)
Combustibili Standard
	Liquido 1 di ISO 1817 (60°C)
	Liquido 2 di ISO 1817 (60°C)
	Liquido 3 di ISO 1817 (60°C)
	Liquido 4 di ISO 1817 (60°C)
	Combust. stand. senza alcool (pref. ISO 1817 liquido C) (23°C)
	Combust. stand. con alcool (pref. ISO 1817 liquido 4) (23°C)
	Combustibile diesel (pref. ISO 1817 liquido F) (23°C)
	Combustibile diesel (pref. ISO 1817 liquido F) (90°C)
	Combustibile diesel (pref. ISO 1817 liquido F) (>90°C)
Soluzioni saline
	Soluzione del cloruro di sodio (10% da massa) (23°C)
	Soluzione dell' ipoclorito del sodio (10% da massa) (23°C)
	Soluzione del cloruro dello zinco (50% da massa) (23°C)
Altri
	Acetato etilico (23°C)
	Perossido di idrogeno (23°C)
	Liquido di freno del DOT N° 4 (130°C)
	Glicol etilenico (50% da massa) in acqua (108°C)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.