Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultradur® B 4440 R01 - PBT - BASF

Material Data Center offers the following functions for Ultradur® B 4440 R01:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultradur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Proprietà Specifiche Materiale
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 10 cm³/10min ISO 1133
Temperatura 250 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 2000 MPa ISO 527
Carico unitario a trazione 28 MPa ISO 527
Deformazione a snervamento 4.5 % ISO 527
Deformazione a rottura 20 % ISO 527
Resistenza all'urto Charpy, +23°C 40 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 35 kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 3.5 kJ/m² ISO 179/1eA
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 223 °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 55 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 135 °C ISO 75-1/-2
Reazione al fuoco a spessore h V-2 class IEC 60695-11-10
Spessore provato 0.4 mm -
Indice di ossigeno 42.9 % ISO 4589-1/-2
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (1) 1 mm -
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Costante dielettrica relativa, 1MHz 3 - IEC 62631-2-1
Fattore di dissipazione, 1MHz 160 E-4 IEC 62631-2-1
Resistività volumica 1E13 Ohm*m IEC 62631-3-1
Resistività superficiale 1E16 Ohm IEC 62631-3-2
Res. Alle correnti striscianti superficiali 600 - IEC 60112
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.4 % Sim. alla ISO 62
Assorbimento d'umidità 0.25 % Sim. alla ISO 62
Massa volumica 1310 kg/m³ ISO 1183
Bulk density 750 kg/m³ -
Proprietà Specifiche MaterialeValoreUnitáNorma del test
ISO Data
Numero di viscosità 125 cm³/g ISO 307, 1157, 1628
Caratteristiche
Processabilità e Forma di Forni
Estrusione di tubi, Altre Estrusioni
Caratteristiche speciali
Ritardante di fiamma, Senza alogeni, Alto urto o modificato all'urto
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.