Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of UNIVAL™ DMDG-6240 NT 7 - (PE-HD) - The Dow Chemical Company

Material Data Center offers the following functions for UNIVAL™ DMDG-6240 NT 7:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Unival datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 0.4 g/10min ASTM D 1238
Temperatura 190 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Resistenza alla trazione di snervamento 23.8 MPa ASTM D 638
Resistenza alla trazione a rottura 16.5 MPa ASTM D 638
Allungamento a snervamento 11 % ASTM D 638
Allungamento a rottura 770 % ASTM D 638
Modulo a flessione 1150 MPa ASTM D 790
Durezza D Shore 62 - ASTM D 2240
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
DTUL a 66 psi 62.8 °C ASTM D 648
Temp.di rammollimento Vicat 121 °C ASTM D 1525
Other Standards[S]
Temperatura di fusione 126 °C Dow Method
S: These properties are reported by the producer according standards that are different to our defaults.
Altre ProprietàValoreUnitáNorma del test
Densità 946 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Soffiaggio
Forma fisica disponibile
Pellet, Bianco
Caratteristiche
Basso odore, Resistenza del fuso
Resistenza Chimica
Resistenza chimica generale, Resistenza alla rottura da stress ambientale
Certifications
Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti secondo la FDA 21 CFR
Applicazioni
Medicale, Imballaggio
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.