Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of UROCHEM -136 Grade - Urea-L - Chemiplastica

Material Data Center offers the following functions for UROCHEM -136 Grade:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Urochem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 0.9 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Resistenza a trazione 55 MPa ISO 527
Resistenza all'urto Charpy, +23°C 12 kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 1.6 kJ/m² ISO 179/1eA
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 130 °C ISO 75-1/-2
Temp.di inflessione sotto caricor, 8.00 MPa 90 °C ISO 75-1/-2
Reazione al fuoco a spessore h V-0 class IEC 60695-11-10
ASTM Data
Indice limite di ossigeno 30 % ASTM D 2863
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Resistività volumica 1E9 Ohm*m IEC 62631-3-1
Resistività superficiale 1E11 Ohm IEC 62631-3-2
Res. Alle correnti striscianti superficiali 600 - IEC 60112
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1500 kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Temperatura dello stampo 145 - 160 °C -
Temperatura dell ugello 95 - 115 °C -
Pressione di Iniezione 70 - 150 MPa -
Contropressione 10 - 14 MPa -
Pressione di chiusura 30 - 80 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Granuli
Additivi
Lubrificanti
Caratteristiche speciali
Ritardante di fiamma, Estab. agli U.V. o per applicaz.in esterni
Caratteristiche
Basso odore, Resistente ai graffi
Resistenza Chimica
Resistenza chimica generale, Resistenza all’olio
Certifications
Contiene risorse rinnovabili
Applicazioni
Elettrotecnica ed electrici
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.