Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® Terra HS1851 - PA610-GF20 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® Terra HS1851:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 21 / * cm³/10min ISO 1133
Temperatura 250 / * °C -
Carico 5 / * kg -
Ritiro di stampaggio, parallelo 0.4 / * % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 0.7 / * % ISO 294-4, 2577
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 6000 / - MPa ISO 527
Carico unitario a rottura 131 / - MPa ISO 527
Deformazione a rottura 3.8 / - % ISO 527
Resistenza all'urto Charpy, +23°C 86 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
Resistenza all'urto Charpy, -30°C 78 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
Resistenzia all'urto Charpy con intaglio, +23°C 11 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
Resistenzia all'urto Charpy con intaglio, -30°C 8.9 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 223 / * °C ISO 11357-1/-3
Temperatura di transizione vetrosa, 10°C/min 49 / * °C ISO 11357-1/-2
Temp.di inflessione sotto carico, 1.80 MPa 204 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 222 / * °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 219 / * °C ISO 306
Coeff.di dilatazione termica lin., parallelo 26 / * E-6/K ISO 11359-1/-2
Coeff.di dilatazione termica lin., perpend. 124 / * E-6/K ISO 11359-1/-2
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 2.6 / * % Sim. alla ISO 62
Massa volumica 1220 / - kg/m³ ISO 1183
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet
Caratteristiche speciali
Alto urto o modificato all'urto, Stabilizzato o stabile al calore
Caratteristiche
Grado tribologico
Resistenza Chimica
Resistenza agli alcali, Resistenza chimica generale, Resistenza al grasso, Resistenza all’olio
Certifications
Contiene risorse rinnovabili
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.