Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ACCULOY™ PCA083L - (PET+ABS) - LyondellBasell Industries

Material Data Center offers the following functions for ACCULOY™ PCA083L:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Acculoy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 5 g/10min ASTM D 1238
温度 230 °C -
荷重 3.8 kg -
成形収縮率., 平行 0.005 mm/mm ASTM D 955
機械的特性値単位テスト基準
ASTM数据
引張弾性率 1700 MPa ASTM D 638
降伏応力 53 MPa ASTM D 638
破壊応力 42 MPa ASTM D 638
降伏点伸び 5 % ASTM D 638
破断伸び 33 % ASTM D 638
曲げ弾性率 2600 MPa ASTM D 790
曲げ強さ 81 MPa ASTM D 790
ロックウェル硬度 R 112 - ASTM D 785
熱的特性値単位テスト基準
ASTM数据
DTUL @ 66 psi 106 °C ASTM D 648
DTUL @ 264 psi 87 °C ASTM D 648
その他の特性.値単位テスト基準
密度 1110 kg/m³ ASTM D 792
特殊な特性
領域別の利用可能性
北アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.