Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of AKROLOY® PA GF 50 black (2706) - (PA66+PA6I/6T)-GF50 - Akro-Plastic GmbH

Check here, which other Akroloy datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.

Processing/Physical Characteristics	乾燥/調湿	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	9 / *	cm³/10min	ISO 1133
温度	275 / *	°C	-
荷重	5 / *	kg	-
成形収縮率, 平行	0.1 / *	%	ISO 294-4, 2577
成形収縮率, 直角	0.4 / *	%	ISO 294-4, 2577

機械的特性	乾燥/調湿	単位	テスト基準
ISO データ
引張弾性率	17500 / 16500	MPa	ISO 527
破壊応力	250 / 220	MPa	ISO 527
破壊ひずみ	3 / 3	%	ISO 527
曲げ弾性率, 23°C	16400 / -	MPa	ISO 178
曲げ強さ	380 / -	MPa	ISO 178
シャルピー衝撃強さ, +23°C	105 / 100	kJ/m²	ISO 179/1eU
シャルピー衝撃強さ, -30ﾟC	95 / -	kJ/m²	ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C	17 / 17	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC	15 / -	kJ/m²	ISO 179/1eA
Ball indentation hardness	290 / -	MPa	ISO 2039-1

熱的特性	乾燥/調湿	単位	テスト基準
ISO データ
溶融温度, 10ﾟC/min	255 / *	°C	ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa	225 / *	°C	ISO 75-1/-2
荷重たわみ温度, 0.45 MPa	245 / *	°C	ISO 75-1/-2
ビカット軟化温度, B	242 / *	°C	ISO 306
線膨張係数, 平行	15 / *	E-6/K	ISO 11359-1/-2
線膨張係数, 直角	65 / *	E-6/K	ISO 11359-1/-2
厚さhでの燃焼性	HB / *	class	IEC 60695-11-10
試験片の厚さ	0.8 / *	mm	-
グローワイヤ燃焼性指数 (GWFI)	700	°C	IEC 60695-2-12
GWFI - 試験片の厚さ	1.6	mm	-

電気的特性.	乾燥/調湿	単位	テスト基準
ISO データ
比誘電率, 1MHz	4.42 / -	-	IEC 62631-2-1
耐トラッキング性	600 / -	-	IEC 60112

その他の特性.	乾燥/調湿	単位	テスト基準
吸水率.	4 / *	%	Sim. to ISO 62
密度.	1590 / -	kg/m³	ISO 1183

Processing Recommendation Injection Molding	値	単位	テスト基準
樹脂温度	320	°C	-
金型温度	100	°C	-
Injection pressure	75	MPa	-

機能

特殊な特性

成形加工法.

射出成形.

納入形状.

黒

領域別の利用可能性

ヨーロッパ., アジア/太平洋地域.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.