Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of APLAX® P2613GN B27 - PP-T30 - Ginar Technology Co.,Ltd.

Material Data Center offers the following functions for APLAX® P2613GN B27:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Aplax datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 1.8 g/10min ISO 1133
温度 230 °C -
荷重 2.16 kg -
成形収縮率, 平行 1.3 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
降伏応力 32 MPa ISO 527
破壊ひずみ 30 % ISO 527
曲げ弾性率, 23°C 2810 MPa ISO 178
曲げ強さ 51 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 8 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC 3 kJ/m² ISO 179/1eA
ロックウェル硬度 90 - ISO 2039-2
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 73 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 129 °C ISO 75-1/-2
その他の特性.値単位テスト基準
密度. 1130 kg/m³ ISO 1183
特殊な特性
成形加工法.
その他の押出成形.
納入形状.
黒
特殊な特性.
熱安定化.
Certifications
RoHS
アプリケーション
自動車
領域別の利用可能性
ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.