Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Armlen® PP MD 15-1FR - PP-MD15 - R&P Polyplastic

Material Data Center offers the following functions for Armlen® PP MD 15-1FR:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Armlen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 22 g/10min ISO 1133
温度 250 °C -
荷重 2.16 kg -
成形収縮率, 平行 0.8 % ISO 294-4, 2577
成形収縮率, 直角 0.8 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張強度 20 MPa ISO 527
破壊ひずみ 12 % ISO 527
シャルピー衝撃強さ, +23°C 24 kJ/m² ISO 179/1eU
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 162 °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 63 °C ISO 75-1/-2
ASTM数据
UL94 燃焼性 V-0 - UL 94
電気的特性.値単位テスト基準
ISO データ
耐トラッキング性 550 - IEC 60112
その他の特性.値単位テスト基準
密度. 1300 kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
樹脂温度 230 °C -
金型温度 60 °C -
Processing Recommendation Extrusion値単位テスト基準
樹脂温度 230 °C -
金型温度 60 °C -
特殊な特性
成形加工法.
射出成形., その他の押出成形.
納入形状.
黒
耐薬品性
Acid Resistance, Alkali Resistance, Oil Resistance
アプリケーション
電気電子
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.