Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of AVALON® 65 ABX - TPU - Huntsman Polymers Corp.

Material Data Center offers the following functions for AVALON® 65 ABX:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Avalon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
機械的特性値単位テスト基準
Other Standards[S]
引張強度 20 MPa DIN 53504
破壊ひずみ 700 % DIN 53504
引裂強さ 25 kN/m DIN 53507
耐摩耗性 60 mm³ DIN 53516
ショア硬さA 65 - DIN 53505
S: These properties are reported by the producer according standards that are different to our defaults.
その他の特性.値単位テスト基準
Other Standards[S]
密度. 1130 kg/m³ DIN 53479
S: These properties are reported by the producer according standards that are different to our defaults.
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 80 - 90 °C -
Pre-drying - Time 2 h -
金型温度 25 - 50 °C -
Feed temperature 25 - 35 °C -
Zone 1 160 - 180 °C -
Zone 2 165 - 185 °C -
Zone 3 165 - 190 °C -
Nozzle temperature 160 - 185 °C -
Screw speed 20 - 80 rpm -
Injection pressure 2 - 10 MPa -
Back pressure 0.03 - 0.3 MPa -
後硬化時間 1 - 5 MPa -
特殊な特性
成形加工法.
射出成形.
な特性
Anti Slip, Scratch Resistant
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.