Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Bergaflex® BFI 25A-319 - TPS - Avient Corporation

Material Data Center offers the following functions for Bergaflex® BFI 25A-319:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Bergaflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Not resistant. May be used under certain conditions (brief contact).

Please consider the information about the application of the materials.
機械的特性単位テスト基準
ISO データ
伸び率100%時の応力 0.5 MPa ISO 527
伸び率300%時の応力 1 MPa ISO 527
破壊応力 TPE 3 MPa ISO 527
破壊ひずみ TPE >300 % ISO 527
圧縮永久ひずみ 23℃, 24h 16 % ISO 815
圧縮永久ひずみ 70℃, 24h 45 % ISO 815
圧縮永久ひずみ 100℃, 24h 75 % ISO 815
ショア硬さA 25 - ISO 7619-1
その他の特性.単位テスト基準
密度. 1170 kg/m³ ISO 1183
試験片の成形条件.単位テスト基準
ISO データ
射出成形, 樹脂温度 170 °C ISO 294
射出成形, 金型温度 30 °C ISO 294
特殊な特性
成形加工法.
射出成形., フィルム押出成形., 異形押出成形., その他の押出成形., ブロー成形., カレンダー加工.
納入形状.
ペレット.
特殊な特性.
紫外線安定化.
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.