Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CarbonX™ Carbon Fiber ABS - ABS-CF20 - 3DXTECH

Material Data Center offers the following functions for CarbonX™ Carbon Fiber ABS:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other CarbonX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
熱的特性 - 電気的特性. - その他の特性. - 3D Data
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.
熱的特性値単位テスト基準
ISO データ
ガラス転移点, 10ﾟC/min 105 °C ISO 11357-1/-2
荷重たわみ温度, 0.45 MPa 76 °C ISO 75-1/-2
電気的特性.値単位テスト基準
ISO データ
表面抵抗率 1E9 Ohm IEC 62631-3-2
その他の特性.値単位テスト基準
密度. 1110 kg/m³ ISO 1183
3D Data値単位テスト基準
引張弾性率, flat 5210[1] MPa -
破壊応力, flat 46[1] MPa -
破壊ひずみ, flat 2[1] % -
曲げ弾性率, flat 5260[1] MPa -
曲げ強さ, flat 76[1] MPa -
1: 45°-45°
特殊な特性
成形加工法.
Additive Manufacturing
納入形状.
Monofilament, 黒
領域別の利用可能性
北アメリカ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.