Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Dryflex® Circular PCR 90A371B U - TPE - Hexpol TPE

Material Data Center offers the following functions for Dryflex® Circular PCR 90A371B U:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Dryflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Recycled Resin Content 37%
機械的特性値単位テスト基準
ISO データ
伸び率100%時の応力 5.7 MPa ISO 527
引張強度 6.5 MPa ISO 37
破壊ひずみ 250 % ISO 37
圧縮永久ひずみ 23℃, 24h 48 % ISO 815
引裂強さ 48 kN/m ISO 34-1
ショア硬さA 90 - ISO 7619-1
その他の特性.値単位テスト基準
密度. 1100 kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 80 °C -
Pre-drying - Time 2 - 3 h -
金型温度 15 - 50 °C -
Zone 1 170 - 190 °C -
Zone 2 180 - 200 °C -
Zone 3 190 - 210 °C -
Nozzle temperature 200 - 220 °C -
特殊な特性
成形加工法.
射出成形.
納入形状.
黒
Certifications
Recycled Resin Content, RoHS
アプリケーション
自動車
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.